The Radial JDV™ Active Super Direct Box is an active class-A direct box with 2-ins, 4-outs & Drag Control. PSU included.
|
The Radial JDX Reactor™ is a direct box designed to capture the explosive dynamics and warmth of an electric guitar amplifier by connecting between the guitar amp head and speaker cabinet.
|
The Radial Firefly is a high output tube direct box designed for stage & studio. It combines Radial's zero negative feedback class-A front end with the warmth and character of a 12AX7 tube drive circuit and Radial's legendary transformer coupled output.
|
The Radial JR2 footswitch allows you to change channels on your Firefly hands free and quickly. The mute switch lets you tune your instrument silently. With the Radial JR2 footswitch you have complete control over your Firefly DI.
|
Using only 48V phantom power, the Radial J48 is an active direct box that produces an exceptionally linear response that extends from 20Hz up to well above 40kHz. The Radial J48 has been designed from the ground up to deliver the most natural tone.
|
The JPC is a stereo consumer to mic level interface that offers a myriad of input connector options to simplify interfacing your computer, DVD/CD, MP3 player or other consumer audio device with the world of balanced professional audio equipment.
|
The Radial J33 is a combination stereo phono preamp and direct box designed for dynamic cartridges. Careful attention has been paid to delivering a smooth sounding RIAA transfer curve while keeping noise down to the absolute minimum.
|
The Radial JD6 is a high performance 6-channel rackmount direct box. Designed for the most demanding studio and live touring applications, it incorporates six top-of-the-line Jensen audio transformers to ensure optimal signal transfer.
|
The Radial JDI Duplex is a full-feature, stereo passive direct box designed to enhance connectivity, reduce noise, and simplify the hectic life of the touring professional, broadcast engineer or AV integrator.
|
The Radial JDI is a passive direct box designed to handle extreme signal levels without distortion of any kind. Unlike an active DI that is limited by the buffering amplifier’s rail voltage, the JDI employs a Jensen audio transformer as the engine.
|
The Radial Twin-Iso is a high performance two channel balanced line-level isolator for professional touring, sound installation, broadcast and studio that provides isolation between various pieces of audio equipment.
|
The Radial JS2 is a high performance balanced mic level splitter that let you split a signal and feed multiple destinations at the same time with 1-input to 2-direct outs & 1 isolated out.
|
The Radial J-Iso is a pro to consumer signal converter. It is designed to take a +4dB balanced line level and bring this down to a -10dB unbalanced format for easy manipulation with computers, hand held recorders and other unbalanced systems.
|
The Radial JS3 is a high performance balanced mic level splitter that let you split a signal and feed multiple destinations at the same time with 1-input to 1-direct out & 2 isolated outs.
|
The Radial Pro-Iso is a pro to consumer signal converter. It is designed to take a +4dB balanced line level and bring this down to a -10dB unbalanced format for easy manipulation with computers, hand held recorders and other unbalanced systems.
|
The Radial J+4 is a stereo preamplifier designed to boost unbalanced instruments and consumer level signals and bring them up to a professional +4dB balanced line level.
|
The Radial CX8-j is an 8 channel contractor mic splitter ready for install with Jensen transformers.
|
The Radial CX8-r is an 8 channel contractor mic splitter ready for install with Radial transformers.
|
The Radial OX8-r is an 8-channel passive microphone splitter with Radial transformers. The passive design enables a microphone to feed two or even three consoles at the same time.
|
The Radial OX8-j is an 8-channel passive microphone splitter with Jensen transformers. The passive design enables a microphone to feed two or even three consoles at the same time.
|
The Radial Engineering T-Block Connector Set allows you to connect bare wire connectivity to the OX8 and LX8 splitters. This set features 8 screw-down blocks for optimum connection and reliability.
|
The Radial SW8 is an 8 channel auto-switcher that allows you to set up a redundant backup system by automatically switching between two sources such as a pair of digital recorders, computers or network systems.
|
The Radial LX8 is a passive line level isolator with Jensen transformers designed specifically to manage balanced signals in professional audio systems.
|
The Reamp JCR is a passive Reamper that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. Instead of worrying about the sound of the track, you can focus your attention on getting the best performance
|
The Radial X-Amp is an active Reamper™ that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.
|
The Radial Reamp Kit includes a Radial J48™ Phantom Powered Active Direct Box and Radial X-Amp Active Re-amplifier. Everything you need to Reamp® in a foam-filled Zebracase.
|
The Radial JD7 is a combination distribution amplifier, direct box and Reamp. The JD7 incorporates 100% discrete parts, class-A circuitry and Jensen audio transformers to deliver near perfect unity gain with plenty of headroom and low noise.
|
The Radial JX44 is a combination guitar input selector, signal distribution amplifier, effects router, direct box and Reamper.
|
The Radial SGI44 is a studio quality bidirectional effects router that designed to take the output from a wireless receiver and run the guitar signal to the pedalboard and back. Connection is made using standard XLR cables.
|
The Radial JR5 remote footswitch can be used with the JX44 to select instrument inputs or amplifier outputs. This heavy duty foot controller features five footswitches with LED indicators and connects to the JX44 using a standard XLR cable.
|